MTB Model MP8 - Point motor switch - 30x42 mm (MP8)

• motorized switch with impulse control, replacement for MP6
• Universal connection as electromagnetic switch
• Impulse control
• 4 stroke stages 3, 6, 9 and 12 mm
• 1x independent switching contact + 2x reverse signaling outputs
• Convenient installation with removable connector

The stroke is adjustable in four stages of 3, 6, 9 and 12 mm by positioning the pin in the sleeve. The coupling mechanism ensures a smooth travel to the end position and its locking.

The MP8 switch serves as a replacement for the standard two-coil switch, with short-pulse control. Supply voltage 9-14V DC, which must be permanently applied (+V and -V) . The transfer to the end position is provided by a memory relay which is operated by a short pulse (min 40ms) from the control device/switch. The pulse inputs are two POS1,POS2, switching the input to pole -V (common zero) will start the movement. The electronics of the shifter ensure a smooth changeover and travel to the end position, even if the control pulse has already passed. The outputs (fb1, fb2) are designed to signal the end position of the inverter by means of an LED or a bulb, these contacts switch after reaching the negative pole of the voltage (-V). Or they can be used for electronics as a feedback of the device position.

For additional use, the MP8 switch is equipped with one isolated switching contact with a capacity of 1A. Limit switches and relays ensure position travel even after the interrupted power supply is restored.